Deblock Oil XS is a blend of fast rust removers and lubricants that far surpasses the performance of ordinary penetrating oils. Due to the application of highly specific ingredients, high-quality interfacial lubrication will occur under extreme shear loads, such as when loosening rusty bolts or nuts, to prevent seizing during disassembly.
Thanks to the slow-evaporating solvents, Deblock Oil XS can also be used in situations where prolonged penetration is necessary and can therefore loosen even extremely rusted screw connections.
The product is suitable for all types of metal. It can therefore also be applied to sensitive connections, such as steel bolts in aluminum, to prevent damage during loosening.
Because many mounting points are often difficult to reach or are located on the underside of an object, the aerosol packaging is equipped with a special system that allows the spray can to be used in any position. Thanks to the special unbreakable nozzle with a straw, even hard-to-reach points can be effectively treated. Base: Mineral oil dissolved in a mixture of solvents and molybdenum disulfide (MoS2)
Volume mass / density: 820 kg/m³
Consistency: Liquid (ready-to-spray aerosol)
Viscosity: ± 2-3 mPa.s (20°C)
Flash point: < 0°C
Pressure resistance: Very good due to the addition of MoS2. However, not suitable under constant extremely severe conditions.
Temperature resistance: -180°C to +400°C
Water resistance: Good. Contains water-displacing additives.
Penetration capacity: Very good.
Lubricant percentage: ± 14%
Processing conditions: -20°C to +40°C
Substrate type: All metal types.
Substrate preparation: Ensure a clean, dry, and grease-free surface.
Application method: Shake aerosol can well before use. Spray directly onto the part to be treated. Allow to act for at least 2-3 minutes and unscrew the part. Repeat treatment if necessary.
Cleaning materials: With Innotec Multisol or Innotec Power Clean
Cleaning hands: With Innotec Safe Hand Clean Plus and water
Shelf life: 2 years in original, unopened packaging
Storage conditions: Store in a cool, dry place
Item no. :
A505
EAN :
5400563035702
Supplier number :
03.1107.9999
Quantity in inner box :
1
Quantity in outer carton :
12
